Assembling the 3 axis plate continued...yet again.

Now for the other linkages, take a ball link and cut it almost in half.


Attach the other uncut ball link. The part where they meet should be off center because one is shorter than the other.


Do this for two of them.


Attach the ball links to the axis rod by threading them through the Allen bolt and screwing it back into the axis rod. It doesn't matter what order they are in for this step as the links are the same.


Attach the linkage closest to the main rodend (the highest one) to the nod servo horn in the same fashion as you did with the rotate servo horn.


Remove the horn from the tilt servo and attach the last linkage to it.


Reattach the horn to the tilt servo.


Assembly should look like this.


Another View


Another view..notice the servo levels in relation to the linkages.

NEXT: ATTACHING THE JAW SERVO